[ C9117AXI-S]Cisco Catalyst 9117I Access Point Internal Antennas

[ C9117AXI-S]Cisco Catalyst 9117I Access Point Internal Antennas


Key features:

-    Wi-Fi 6 certifiable

-    Three radios: 2.4 GHz (4x4), 5 GHz (8x8), and BLE

-    OFDMA and MU-MIMO

-    Multigigabit support

-    Internal  antenna

-    802.11ax beamforming

-    20-, 40-, 80-, and 160-MHz channels

-  PHY data rates up to 5 Gbps at 5 GHz (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

-  รอบรับการทำการแบบ Controller-less 

-  สามารถทำงานรวมกับ Wireless Controller ของ Cisco (Click>>Wireless Compatibility)

-  รับประกัน 90 วัน กรณีสินค้ามีปัญหา COMEBUY เปลี่ยนตัวใหม่ให้

-  Limited lifetime warranty จาก CISCO (ส่งสินค้าเคลมต่างประเทศ)

38,000 THB 26,500 THB
- +
Model Cisco Catalyst 9117
Product Number C9117AXI-S
Access Point Type Indoor Access Point
Wi-Fi standards 802.11a/b/g/n/ac Wave2/ax
Target deployment Small or midsize enterprise
Antenna type Internal
Modularity support USB
Number of radios Three ( 2.4GHz, 5GHz, BLE)
Combined maximum data rate 5 Gbps
MIMO radio design: number of spatial streams 8x8:8 MU-MIMO
Channel width 20 MHz (2.4 GHz); 20/40/80/160 MHz (5 GHz)
Concurrent MU-MIMO 8
Maximum clients (Recommend) 70
Controller-less Access Point Support (Mobility Express)
Ethernet support 5 G mGig
USB port Yes
Bluetooth Low Energy (BLE) BLE 5.0
Beam forming Standards-based
RF interference avoidance -
Band Select Yes
Rogue access point detection Yes
Wireless Intrusion Protection System (wIPS) Yes
Power options PoE 802.3bt , PoE 802.3at, PoE 802.3af, Cisco power injector
Temperature range 0 to 50°C

The Cisco® Catalyst® 9117 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.

Hyperconnectivity with steady performance in demanding environments. Exponential growth of Internet of Things (IoT) devices and next-generation applications. Advanced persistent security threats. All of these require a wireless network that provides resiliency and superior connectivity, integrated security with advanced classification and containment, and hardware and software innovations to automate, secure, and simplify networks. Updating your wireless infrastructure to one that will meet these needs is paramount for today’s digital business. The new generation of Cisco Catalyst 9100 Access Points, with high-performance Wi-Fi 6 (802.11ax) capabilities and innovations in RF performance, security, and analytics, enables end-to-end digitization and helps accelerate the rollout of business services by delivering beyond Wi-Fi.

The Cisco Catalyst 9117 Access Points deliver several features of Wi-Fi 6 while offering high data rates.

Key features:

-     Wi-Fi 6 compatible

-     Three radios: 2.4 GHz (4x4), 5 GHz (8x8), and BLE

-     OFDMA and MU-MIMO

-     Multigigabit support

-     Internal antenna

The Cisco Catalyst 9117 Access Points support both Orthogonal Frequency-Division Multiple Access (OFDMA) and Multiuser Multiple Input, Multiple Output (MU-MIMO), delivering more predictable performance for advanced applications and IoT. Additionally, with up to 5 Gbps with NBASE-T and IEEE 802.3bz Ethernet compatibility, the Cisco Catalyst 9117 can seamlessly offload network traffic without any bottlenecks. With Cisco’s Multigigabit technology, you can use your existing Category 5e or 6 cabling to achieve speeds up to 5 Gbps, allowing for higher throughputs with minimum cost.

Features and Benefits



802.11ax (Wi-Fi 6)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac standard.

802.11ac Wave 2 support

Provides a connection rate of up to 3.5 Gbps—significantly higher than rates offered by today’s high-end 802.11ac access points.


OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients only in the downlink direction to reduce overhead and latency.

MU?MIMO technology

Supporting eight spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.

Target wake time

A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the AP. This offers significant energy savings for battery-operated devices, up to 3x to 4x compared to 802.11n and 802.11ac.

Cisco Mobility Express

Mobility Express is designed for networks of all sizes, including small and medium-sized businesses and distributed enterprises. It provides industry-leading wireless LAN technology without the need for a physical controller or additional licenses.

Multigigabit Ethernet support

Provides uplink speeds of 5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.

Bluetooth 5.0

Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.

Apple Features

Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in iOS 10, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications.

At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.


Secure Infrastructure

Trustworthy systems built with Cisco Trust Anchor Technologies provide a highly secure foundation for Cisco products. With The Catalyst 9100 Series, these technologies enable hardware and software authenticity assurance for supply chain trust and strong mitigation against man-in-the-middle attacks that compromise software and firmware. Trust Anchor capabilities include:

-     Image signing: Cryptographically signed images provide assurance that the firmware, BIOS, and other software are authentic and unmodified. As the system boots, the system’s software signatures are checked for integrity.

-     Secure Boot: Cisco Secure Boot technology anchors the boot sequence chain of trust to immutable hardware, mitigating threats against a system’s foundational state and the software that is to be loaded, regardless of a user’s privilege level. It provides layered protection against the persistence of illicitly modified firmware.

-     Cisco Trust Anchor module: A tamper-resistant, strong cryptographic, single-chip solution provides hardware authenticity assurance to uniquely identify the product so that its origin can be confirmed to Cisco. This provides assurance that the product is genuine.

Intelligence for Proactive Insights and Analytics

With multi-RF support paramount for IoT devices and expanded ecosystem partnerships, the Catalyst 9100 portfolio provides unprecedented visibility from mobile devices on Cisco network. Enabling digitization with Cisco DNA Architecture, Catalyst 9100 portfolio further Cisco RF innovations for securing air with real-time telemetry, guided remediation, and optimization for Wi-Fi and IOT networks. The Cisco Catalyst 9100 series access points can support advanced spectrum intelligence, device analytics and network assurance.

Aesthetically Redesigned for Next Generation Enterprise

The Catalyst 9100 series access points are built from the ground-up, with new aerodynamic look and smooth finish, integrating RF excellence and next generation technologies to provide the best-in-class wireless experience without compromise. While packing several high performance features, the hardware is re-designed to deliver higher efficiencies in a more compact form-factor to make visually appealing Wi-Fi deployments commonplace.

Cisco DNA Support

Pairing the Cisco Catalyst 9117 Access Points with the Cisco Digital Network Architecture (Cisco DNA) allows for a total network transformation. Cisco DNA allows you to truly understand your network with real-time analytics, quickly detect and contain security threats, and easily provide networkwide consistency through automation and virtualization.

Cisco DNA with Software-Defined Access (SD-Access) is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. By decoupling network functions from the hardware, you can build and manage your entire wired and wireless network from a single user interface. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include:

-     Simplified device deployment

-     Unified management of wired and wireless networks

-     Network virtualization and segmentation

-     Group-based policies

-     Context-based analytics

The Cisco Catalyst 9117 Access Points support Software-Defined Access, Cisco’s leading enterprise architecture.

Working together, the Cisco Catalyst 9117 and Cisco DNA offer such features as:

-     Cisco DNA Spaces

-     Cisco Identity Services Engine

-     Cisco DNA Analytics and Assurance

-     And much more

Product Specifications



Part numbers

Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas

-  C9117AXI-x: Cisco Catalyst 9117

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.


-  Cisco Unified Wireless Network Software Release 8.9 or later

-  Cisco IOS ® XE Software Release 16.11 or later

Supported wireless LAN controllers

-  Cisco Catalyst 9800 Series Wireless Controllers

-  Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

-  8x8 MIMO with four spatial streams for 5-GHz band

-  4x4 MIMO with four spatial streams for 2.4-GHz band

-  Maximal Ratio Combining (MRC)

-  20- and 40-MHz channels

-  PHY data rates up to 600 Mbps (40 MHz with 5 GHz)

-  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

-  Cyclic Shift Diversity (CSD) support


-  8x8 downlink MU-MIMO with eight spatial streams

-  MRC

-  802.11ac beamforming

-  20-, 40-, 80, and 160-MHz channels

-  PHY data rates up to 3.5 Gbps at 5 GHz

-  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

-  CSD support


-  8x8 MIMO with eight spatial streams for 5-GHz band

-  4x4 MIMO with four spatial streams for 2.4-GHz band

-  Downlink OFDMA

-  TWT

-  MRC

-  802.11ax beamforming

-  20-, 40-, 80, and 160-MHz channels

-  PHY data rates up to 5 Gbps at 5 GHz

-  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

-  CSD support

Integrated antenna

-  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

-  5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth


-  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

-  Management console port (RJ-45)

-  USB 2.0 with up to 3.75W (enabled via future software)


-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

-  Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)

-  Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)


-  3.02 lb (1.4 kg)

Input power requirements

-  802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)

-  Cisco power injector, AIR-PWRINJ6=

-  802.3af PoE

-  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.

Power draw

802.3bt Cisco UPoE Full Feature


Power source

Power type



Link speed




802.3bt Cisco UPoE




5 Gbps




802.3at Full Feature*


Power source

Power type



Link speed








5 Gbps




802.3af Reduced Feature


Power source

Power type



Link speed








2.5 Gbps



* USB port can be enabled, but the 5-GHz radio will be reduced to 4x4.


-  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

-  Nonoperating (storage) altitude test: 25?C, 15,000 ft.

-  Operating temperature: 32° to 122°F (0° to 50°C)

-  Operating humidity: 10% to 90% (noncondensing)

-  Operating altitude test: 40?C, 9843 ft.

System memory

-  2048 MB DRAM

-  1024 MB flash


-  802.11 dynamic frequency selection (DFS)


Limited lifetime hardware warranty