Specification | |
Model | Cisco WAP125 |
Product Number | WAP125-E-K9 |
Access Point Type | Desktop Access Point |
Wi-Fi standards | 802.11a/b/g/n/ac |
Target deployment | Small businesses |
Antenna type | Internal Antenna |
Modularity support | - |
Number of radios | Dual (2.4 GHz and 5 GHz) |
Combined maximum data rate | 867 Mbps |
MIMO radio design: number of spatial streams | 2x2:2 |
Channel width | 20 MHz (2.4 GHz); 20/40/80MHz (5 GHz) |
Concurrent MU-MIMO | - |
Maximum clients (Recommend) | 20 |
Controller-less Access Point | - |
Ethernet support | 1 x GE |
USB port | - |
Bluetooth Low Energy (BLE) | - |
Beam forming | - |
RF interference avoidance | - |
Band Select | Yes |
Rogue access point detection | Yes |
Wireless Intrusion Protection System (wIPS) | No |
Power options | 802.3af/at |
Temperature range | 0 to 40°C |
Faster Wi-Fi, Secure Connectivity, Do-It-Yourself Installation.
Highlights
- Provides cost-effective 802.11ac/n connectivity for 2.4-GHz and 5-GHz clients with speeds up to 867 Mbps
- Gigabit Ethernet LAN interface with Power over Ethernet (PoE) enables flexible installation
- A captive portal provides highly secure guest access with customized roles and rights
- Works right out of the box with easy installation and a simple web-based configuration wizard
- Supported by the new Cisco® FindIT Network Management platform for easy management and control
- Provides peace of mind with a limited lifetime hardware warranty
Figure 1 shows a typical wireless access point configuration. Figures 2 and 3 show the product’s front and back panels, respectively.
Figure 1. Typical wireless access point configuration
Figure 2. Front panel
Figure 3. Back panel
Features
- The single radio supports both 5 GHz and 2.4 GHz, with speeds up to 867 Mbps for increased capacity and coverage
- The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network
- Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information
- A captive portal supports secure, customized guest access with multiple rights and roles
- Simple installation and an intuitive web-based configuration wizard enable fast, simple deployment and setup in minutes
- Support for PoE makes installation easy without expensive additional wiring
- Sleek design with multiple internal antennas and integrated stand
- Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance
- Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
- Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
- Support for Cisco FindIT Network Management platform offers easy management and control
- Limited lifetime hardware warranty provides peace of mind
Specifications
Specifications |
Description |
|
Standards |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (Security Authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
|
Cabling type |
Category 5e or better |
|
Antennas |
Internal antennas optimized for installation on desktop |
|
Led indicators |
1 multifunction LED |
|
Operating system |
Linux |
|
Physical Interfaces |
||
Ports |
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included) |
|
Power supply |
External 12V/1A DC power jack (Energy Star 2.0 compliant with Efficiency Level 6) and 802.3af/at PoE |
|
Buttons |
Reset button, power on/off push button |
|
Lock slot |
Slot for Kensington lock |
|
LEDs |
1 LED |
|
Physical Specifications |
||
Physical dimensions |
4.85 x 4.85 x 1.25 in. (123 x 123 x 31 mm) |
|
Weight |
0.67 lb (303 g) |
|
Network Capabilities |
||
VLAN support |
Yes |
|
Number of VLANs |
1 management VLAN plus 8 VLANs for SSIDs |
|
802.1X supplicant |
Yes |
|
SSID-to-VLAN mapping |
Yes |
|
Auto-channel selection |
Yes |
|
Spanning tree |
Yes |
|
Load balancing |
Yes |
|
IPv6 |
Yes IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP) |
|
Layer 2 |
802.1Q-based VLANs, 8 active VLANs plus 1 management VLAN |
|
Security |
||
WPA/WPA2 |
Yes, including enterprise authentication |
|
Access control |
Yes, management Access Control List (ACL) plus MAC ACL |
|
Secure management |
HTTPS |
|
SSID broadcast |
Yes |
|
Rogue access point detection |
Yes |
|
Mounting and Physical Security |
||
Mounting options |
Desktop |
|
Physical security lock |
Kensington lock slot |
|
Quality of Service |
||
QoS |
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS |
|
Performance |
||
Wireless throughput |
Up to 867-Mbps data rate (real-world throughput will vary) |
|
Recommended user support |
Up to 64 connective users, 10 active users |
|
Configuration |
||
Web user interface |
Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) |
|
Management |
||
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
|
Remote management |
Yes |
|
Event logging |
Local, remote syslog, email alerts |
|
Network diagnostics |
Logging and packet capture |
|
Web firmware upgrade |
Firmware upgradable through web browser, imported or exported configuration file |
|
Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
|
IPv6 host |
Yes |
|
HTTP redirect |
Yes |
|
Wireless |
||
Frequency |
Dual bands (2.4 and 5 GHz) |
|
Radio technologies |
802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM) |
|
Modulation types |
802.11b: BPSK, QPSK, CCK 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
|
WLAN |
802.11ac/n 2x2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz 2x2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20 and 40 MHz for 802.11n PHY data rate up to 867Mbps |
|
Data rates supported |
802.11a/b/g: ? 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
-20-MHz bandwidth: MCS 0-15 for supported data rates -40-MHz bandwidth: MCS 0-15 for supported data rates
-20-MHz bandwidth: MCS 0-9 for supported data rates -40-MHz bandwidth: MCS 0-9 for supported data rates -80-MHz bandwidth: MCS 0-9 for supported data rates |
|
Frequency band and operating channels |
A/C Regulatory Domain
E/J Regulatory Domain:
|
K Regulatory Domain:
|
Wireless isolation |
Wireless isolation between clients |
|
External antennas |
None |
|
Internal antennas |
Internal Fixed Planar Inverted-F Antenna (PIFA) |
|
Antenna gain In dBi |
Maximum antenna gain of 4.02 dBi on 2.4 GHz Maximum antenna gain of 5.63 dBi on 5 GHz |
|
Wireless Distribution System (WDS) |
Yes |
|
Fast roaming |
Yes |
|
Multiple SSIDs |
8 |
|
Wireless VLAN map |
Yes |
|
WLAN security |
Yes |
|
Wi-Fi Multimedia (WMM) |
Yes, with unscheduled automatic power save |
|
Operating Modes |
||
Access Point mode, WDS Bridging, Workgroup Bridge mode |
||
Environmental |
||
Power options |
IEEE 802.3af Ethernet switch Cisco Power Injector: SB-PWR-INJ2-xx AC adapter included, 12V/1A POE peak power: 6.5W |
|
Compliance |
Safety: ? UL 60950-1 ? CAN/CSA-C22.2 No. 60950-1 ? IEC 60950-1 ? EN 60950-1 Radio approvals: ? FCC Part 15.247, 15.407 ? RSS-210 (Canada) ? EN 300.328, EN 301.893 (Europe) ? AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ? FCC Part 15.107 and 15.109 ? ICES-003 (Canada) ? EN 301.489-1 and -17 (Europe) |
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Storage temperature |
-20° to 70°C (-4° to 158°F) |
|
Operating humidity |
10% to 85% noncondensing |
|
Storage humidity |
5% to 90% noncondensing |
|
System memory |
256 MB RAM 128 MB flash |
|
Package Contents |
||
? Quick-start guide |
||
Minimum Requirements |
||
-Switch/router with PoE support, PoE injector, or AC power adapter -Web-based configuration: Web browser |
||
Warranty |
||
Access point |
Limited lifetime |